360° Articulating Bench Vise – Lock Any Angle With One Hand, 8 Locking Positions, Swap-In Jaw Pads, Base & XL

Product Introduction

You're working on a project. You need a different angle. So you loosen the vise, reposition the workpiece, clamp it down again. Two minutes later, you need another angle. Repeat. 😐

This articulating bench vise changes that. A ball-and-socket joint lets you rotate, tilt, and swivel your workpiece without unclamping it. Then one hand on the quick-lock lever locks it solid. Eight fixed locking positions. Rated to 130 ft-lbs of torque on the Base model, and 150 ft-lbs on the XL model with its reinforced locking mechanism. Swap-in jaw pads for wood, metal, pipes, and delicate surfaces.

Adjust the angle. Lock it down. Keep working.

Product Features

🔄 One hand. Any angle. Locked solid.
The ball-and-socket joint rotates, tilts, and swivels 360°. Find the angle you need, then engage the quick-lock lever with one hand. It stays where you put it. No unclamping. No repositioning. No interrupting your workflow. 🛠️

🔒 Eight locking positions. Up to 150 ft-lbs rated torque.
When the job demands extra stability, the locking pin engages one of eight fixed positions. The Base model is rated to 130 ft-lbs. The XL model uses a reinforced locking mechanism rated to 150 ft-lbs — so larger workpieces stay put under heavier force. File, saw, chisel, drill, or wrench. It's not a light-duty hobby vise. It's built for real force. 💪

🪵 Swap-in jaws for any material.
Dual-sided interchangeable jaw pads change in seconds. Textured side for flat pieces and wood. Grooved side for pipes, rods, and round shapes. Add leather jaws for delicate finishes. One vise, multiple grip surfaces. ✅

💪 Strength you can see. Not just read about.
We clamped a wooden board in the vise and sat on it. The board snapped outside the clamping area. The vise didn't move. That's not a spec sheet. That's a demonstration. When it holds under a person's weight, it holds under your project. 🎯

📍 Create a workspace anywhere.
Mount it to any bench with the included hardware. Bolt it to a trailer, a truck tailgate, a temporary workbench, or any surface with mounting holes. Woodworking. Metal cutting. Welding. Sanding. Drilling. Routing. One vise, any worksite. 🚚

Recommended Use

• Woodworking: planing, sawing, drilling, routing, assembly
  
• Metalwork: cutting, sanding, filing, welding support
  
• Repair: bicycle, equipment, firearms, home repair
  
• DIY & Making: crafts, detail work, small parts
  
• On-site: trailer, truck tailgate, temporary bench, any surface with mounting holes

Product Specifications

• Base Model
  

Jaw Width: 5" (12.7 cm)
Weight: Approx. 10 lbs (4.5 kg)
Torque Rating: 130 ft-lbs (rated)
Overall Dimensions (L × W × H): 11.42 × 13.13 × 9.25 in (29 × 33.3 × 23.5 cm)

• XL Model

Jaw Width: 7" (17.8 cm)
Weight: Approx. 16 lbs (7.3 kg)
Torque Rating: 150 ft-lbs (rated, reinforced locking mechanism)
Overall Dimensions (L × W × H): 14.5 × 16.5 × 11.8 in (36.8 × 41.9 × 30 cm)

Shared specifications (both models):

• 360° rotation
  
• 8 locking positions
  
• Dual-sided interchangeable jaw pads
  
• Hardened steel + cast aluminum construction
  
• Bench-mount installation
  
• Carriage bolts, washers, nuts included

Package Contents

• 1 × Articulating bench vise
• 1 × Dual-sided interchangeable jaw pads (pre-installed)
• 4 × Jaw locking pins
• 3 × 1/4"-20 × 2-1/4" carriage bolts, washers, and nuts
• 1 × User guide

✨ Stop unclamping. Start working.

One vise. Any angle. Locked in seconds. Whether you're in the workshop, on-site, or working out of a trailer — bring your work into the right position and keep moving.